img

EMBEDDED Wi-Fi PROTOCOL STACK

Unscramble your next
Wi-Fi enabled project

 
 
 
 
 

ClarinoxWiFi is a proven Wi-Fi protocol stack with AP,STA,P2P and Mesh roles, while also boasting support for a large range of different RTOS/MCU. ClarinoxWiFi empowers developers to create reliable and high-performance Wi-Fi connections, for a wide range of wireless embedded applications.

 
 

Embedded Market Forecasters report; that 53.5% of wireless developments for the following 12 months intend to include IEEE802.11a/b/g/i or n standard. In the same report, a performance analysis of Wi-Fi® projects in the past 12 months revealed that 10.7% were canceled and 39.1% were behind schedule. These figures are testimony to both the popularity of the technology and the extraordinary challenges present in WiFi developments. For over a decade, Clarinox has collaborated with national and international clients to develop breakthrough wireless embedded products. We have used our experience to implement IEEE802.11a/b/g/n, AP, STA, P2P, and GO for a range of embedded platforms. You’ve experienced the hard way – let Clarinox make your next embedded WiFi project easier.

 
 
 

Standards

802.11a/b/g/n/ac/
ax/mc/i/r/h

2.4GHz, 5GHz and 6GHz bands
Supports multiple simultaneous Wi-Fi roles
Implementation of Security Architecture, SoftAP, SoftMAC, and Supplicant
isolation of application from lower layers
 
 

Standards

802.11a/b/g/n/ac/
ax/mc/i/r/h

2.4GHz, 5GHz and 6GHz bands

Supports multiple simultaneous Wi-Fi roles

Implementation of Security Architecture, SoftAP, SoftMAC, and Supplicant

Isolation of application from lower layers

 
 

Standards

802.11a/b/g/n/ac/
ax/mc/i/r/h

 
2.4GHz, 5GHz and 6GHz bands
Supports multiple simultaneous Wi-Fi roles
Implementation of Security Architecture, SoftAP, SoftMAC, and Supplicant
Isolation of application from lower layers
 
FLEXIBLE

ClarinoxWiFi is a developer-friendly WLAN software protocol stack, designed exclusively for the development of embedded wireless LAN applications. The WLAN stack allows users to develop complex applications that support WiFi station mode, access point mode or peer to peer mode.

PORTABLE

The ClarinoxWiFi WLAN protocol stack is contained within the ClarinoxSoftframe ™ portable framework, allowing users to develop their applications using C/C++ on different hardware and operating system platforms with confidence of compatibility. Combined with the compactness of the protocol stack, this enables use with a number of architectures.

SIMPLE API

The simplicity of the ClarinoxWiFi API greatly reduces application development times. The plain language style also facilitates faster test and debug cycles.

 

Wi-Fi Stack

 

ClarinoxWiFi stack supports all common Wi-Fi modes such as Access Point (AP), Station (STA), Peer-to-Peer (P2P) and Wi-Fi Protected Setup (WPS). ClarinoxWiFi provides a set of API’s for initialization and de-initialization of the WLAN stack and another set of API's for performing WLAN management operations, such as scanning for access points, connecting etc. The data traffic is routed through a separate Network stack interface layer. ClarinoxWiFi supports many TCP/IP stacks, e.g. AUTOSAR TCP/IP, Android/Linux TCP/IP, Azure RTOS NetX/NetX Duo, lwIP, NXP® MQX RTCS.

For ensuring secure wireless connectivity the stack supports WPA/WPA2 Personal, WPA/WPA2 Enterprise encryption protocols in station mode operation. It supports encryption protocols WPA/WPA2 Personal for applications using access point mode.

ClarinoxWiFi supports WLAN modules manufactured by Texas Instruments, Marvell and Realtek, i.e WL18xx family, WL12XX family, Mv88w8xxx family and RTL87xx family WLAN modules. The WLAN stack supports both SPI (1 bit SDIO) and SDIO communication interfaces to the WLAN hardware modules, with interface clock speeds as low as 500 kHz for low speed low energy applications using Texas Instruments WL18xx chipsets.

The integrated ClariFi™ Debugger interface of the ClarinoxWiFi provides useful insights into the operation of the WLAN stack. This includes debug information spanning from low level WLAN module commands all the way upto TCP/IP protocol message wireshark views.

img
 
img

Wi-Fi Mesh Stack

 

The Clarinox WiFi Mesh is a simultaneous AP and STA roles based; EasyMesh-like architecture based on the Clarinox WiFi protocol stack.


Key Features

  • IEEE1905 protocol and tree-based topology organization
  • Efficient routing to find the best paths quickly
  • Self-healing and self-organizing network to maintain seamless connectivity
  • Dynamic node discovery and connectivity at node failures and to support mobile nodes
  • Support for rootless topology to increase decentralization
  • Node roaming to optimize the load at maximum downstream connections and throughput. High debugging skills via ClariFi, powered by a dynamic topology visualization page
  • Equipped with the latest Wi-Fi and security standards like 802.11ax and WPA3 • Dynamic or Static IP configuration
 

Specifications

Features Security,
SoftAP,
SoftMAC,
Supplicant support
Standards 802.11a, 802.11b, 802.11g, 802.11n, 802.11ac, 802.11i, 802.11r, 802.11h, Wi-Fi Direct, Miracast
Roles AP, STA, P2P client, P2P GO
Security WPA/WPA2 Personal, WPA/WPA2 Enterprise, 802.11x authentications with TKIP, CCMP, TKIP/CCMP, WPS, EAP-TLS, EAP-PEAP/MSCHAPv2 (Both PEAPv0 and PEAPv1), EAP-PEAP/TLS (Both PEAPv0 and PEAPv1), EAP-PEAP/GTC (Both PEAPv0 and PEAPv1), EAP-PEAP/OTP (Both PEAPv0 and PEAPv1), EAP-PEAP/MD5-Challenge (Both PEAPv0 and PEAPv1), EAP-TTLS/EAP-MD5-Challenge, EAP-TTLS/EAP-GTC, EAP-TTLS/EAP-OTP, EAP-TTLS/EAP-MSCHAPv2, EAP-TTLS/EAP-TLS, EAP-TTLS/MSCHAPv2, EAP-TTLS/MSCHAP, EAP-TTLS/PAP, EAP-TTLS/CHAP, EAP-SIM, EAP-AKA, EAP-AKA', EAP-PSK, EAP-PAX, EAP-SAKE, EAP-IKEv2, EAP-GPSK, EAP-PWD, LEAP (note: required special support from driver for IEEE 802.11 authentication)
 
 

Supported Platforms

CLICK HERE FOR
THE FULL LIST
 

Related Videos

 

Related News

Clarinox announces Bluetooth™ and Wi-Fi support for Renesas RA Microcontroller Family:

More

2017 is set to see the largest ARM TechCon event ever!: It’s time again for the global embedded industry to gather at the Santa Clara Convention Cen ...

More

Clarinox to provide Bluetooth and Wi-Fi for Renesas Electronics' R-Car platform: Clarinox, a leading provider of automotive connectivity solution ...

More

 
 

PRODUCTS & SOLUTIONS

 
 

A robust Bluetooth Classic/LE protocol stack, Auracast and Mesh ready , supporting over 15 different RTOS. ClarinoxBlue is a dev- friendly stack, that offers advance embedded connectivity solutions.

More

 

A proven Wi-Fi protocol stack with AP, STA P2P, WPS, Mesh, ported to over 15 different RTOS. Clarinox Wi-Fi empowers developers to create reliable and high-performance embedded Wi-Fi connections.

More

 

ClariFi™ an all-in-one high-level debugger with integrated Bluetooth and Wi-Fi sniffers, protocol analysis, memory optimization, leak analysis, and detailed thread/task insights.

More

 

Our versatile protocol stacks operate seamlessly on the Clarinox SoftFrame abstraction layer, facilitating swift portability,co-existence, and interoperability.

More

 
 
 

CONTACT